The Wispr Ground Control Update Tool crashes when I try to run it, and will not install the app. How can I fix this?
Confirm you followed all steps correctly in the manual: Updating Wispr Ground Control
Ensure that you are installing from the extracted file and not the zipped folder.
Can the volume of the smart controller be muted/unmuted from inside of WisprGroundControl?
Yes. You can mute all audio output if needed by navigating to the settings button on the toolbar, going to general, scroll down and click the “Mute all audio output” option as seen below. To unmute the volume, simply click to uncheck the option box.
I’ve tried to upload a new version of WGC Flight Firmware through Mission Planner, and it says “Can Not Read Board” How can this be fixed?
If you try to load the Custom Flight Firmware onto the drone and you have confirmed everything is hooked up correctly and you still get the error message of “cannot read board”, you should check in the top right and make sure the COM port is set to Auto. If it is set to anything else you will not be able to load the Custom Flight Firmware and will get an error message. Change to Auto on the COM port.
How do I use the Offline Maps feature and what is its purpose?
Offline maps are good to create if you are going to be flying at a later time in a spot without Wi-Fi access but still need the maps while flying. Without Wi-Fi you will not be able to download the maps of the area you are in. Here is a guide on how to use them and how to download them on your smart controller : Downloading Maps While Offline and Setting Terrain Follow