Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

Using Here+ RTK With WISPRGroundControl

Sections

Connecting the Here+ RTK Base Station to your computer

  1. The Here+ base should be connected to the GPS through the SMA connector. To connect simply screw the SMA female connector end of the GPS onto the male connector of the Here+. (pictured below)

2. Connect the USB cord into the 5 pin port on the Base and connect the other end (USB end) into the USB of the computer/tablet you intend to use the RTK system.

3. Connect the GPS on top of a tripod or something similar that is lifted in the air and is stable. Be sure there are no obstructions between the GPS and the sky. This will ensure you pick up the most satellites and also deter any blocking of signal.

How to Connect the Here+ to WISPRGroundControl

  1. What

Additional tips can be added here

Warnings and common errors can be added here

Things that should be absolutely avoided should be added here

  • No labels