Can the volume of the smart controller be muted/unmuted from inside of WISPRGroundControl?
Yes. You can mute all audio output if needed by navigating to the WISPR Icon on the toolbar, General, then scroll down and tap the “Mute all audio output” selection box as seen below. To unmute, tap the box once more.
I’ve tried to upload a new version of WGC Flight Firmware through Mission Planner, and it says “cannot Read Board”. How can this be fixed?
If you try to load the Custom Flight Firmware onto the drone and you have confirmed everything is connected correctly but you still get this error, you should look in the top right and make sure the COM port is set to Auto. If it is set to anything else you will not be able to load the Custom Flight Firmware, resulting in this error message.
How do I use the Offline Maps feature and what is its purpose?
Offline maps are a good tool to utilize if you are going to be flying at a later time in an area without Wi-Fi access, but still will need access to the maps to fly. Without Wi-Fi, you will not be able to download the maps of the area you are in. Here is a guide on how to use and download them on your smart controller : Downloading Maps While Offline and Setting Terrain Follow