...
If either the drone mode is not correct or the CPE Static LAN address is not correct, changes those to the appropriate settings and reboot the drone for the changes to take affect.
Once rebooted( If needed), connect back to the Access Point and connect back to the Wispr WISPR OS.
Accessing the CPE GUI
Open a second tab while still connected to the WISPR OS and type 192.168.1.20 into your address bar.
Log into the CPE interface
You may now connect to the tower you are wanting to get signal from and fly the drone to find the best height, signal and azimuth by reading the live data in the CPE GUI.
...