...
Steps to set UAS ID in WISPR Ground Control
1. Update Software and Firmware
Update WISPR Ground Control to V1.5.0 and update the latest version.
Update WISPR Flight Firmware to V1.5.0.the latest version.
Power
...
On Controller and drone - Launch WISPR Ground Control
Power on the drone.
Launch WISPR Ground Control on your controller.Let the paramerts load completly on WISPR Ground Crontrol then select the W
Load Parameters and Access FAA Registration Section
Allow parameters to fully load once launching WISPR Ground Control.
Select the W icon in the top-left corner of the screen and click Settings -> Safety -> .
Navigate to Settings → Safety → FAA Registration.
Enter and Verify UAS ID
Locate your UAS ID
...
on the label
...
affixed to the side or bottom of the drone.
If
...
a UAS ID
...
is already present in the settings on the controller, confirm it matches the UAS ID on the
...
drone’s label.
If
...
a UAS ID
...
is already entered, it should be greyed out
...
Operator ID should be WisprSystems.
...
, preventing modifications.
Click the "Set UAS ID" button to confirm the UAS ID entry. Press “Set UAS ID” button to confirm you have entered the the drone UAS ID.
Once you press this button, a
...
slide out will ask you to confirm your UAS ID has been entered correctly. Ensure the ID is correct (it cannot be changed) and select “YES”.
...
Select Control on the left menu bar and scroll to the bottom of the page. You will see
...
your WISPR Ground Control version,
...
WISPR Flight Firmware version and the Drone Serial Number. Ensure these are all correct.
Reboot the drone and you have now set the UAS ID!
| Info |
|---|
Please see the Quickstart Walkthrough Video Here : https://wisprsystems.atlassian.net/wiki/x/AwBJEg |
...