...
OpenDroneID: waiting on controller location
This message appears when the system has connected to the controller, but the controller hasn't determined its location yet. Once the location is found, the message will disappear. Once location is found it should not be lost as long as WisprGroundControl remains open.
Controller Location Lost:
This indicates the GCS’s location was lost. In normal use the user should not encounter this message unless they change apps or restart WGCWisprGroundControl. In such case the controller should still pull its location soon if signal is strong enough and the message will clear.
Waiting on Initialization:
This message means that the system hasn't yet received any information from the controller. It should only appear for a few seconds while the connection is being set up.
On rare occasion the RemoteID module may not transmit signal promptly enough and cause this error to not clear normally, but is not cause for concern. To resolve it, please close WISPRGroundControl, reboot the drone, and then reopen WISPRGroundControl. The Pre-arm error should no longer be present.
Other Messages:
On boots where WGC WisprGroundControl is not open before the drone is powered, the user may see ‘Lost controller location’ in the alerts tab right at startup. You can safely disregard this message, as it seems to generate in the brief interval when WGC WisprGroundControl first connects to the drone. It should not impact your operations.
...