General FAQs’

Can the volume of the smart controller be muted/unmuted from inside of WISPRGroundControlWisprGroundControl?

Yes. You can mute all audio output if needed by navigating to the WISPR Icon on the toolbar, General Settings, then scroll down and tap check the “Mute all audio output” selection box as seen below. To unmute, tap uncheck the “Mute all audio output” box once more.

...

I’ve tried to upload a new version of WGC Flight Firmware through Mission Planner , and it says “cannot and I get the error “Cannot Read Board”. How can this be fixed?

If you try to load the Custom Flight Firmware onto the drone and you have confirmed everything is connected correctly but you still get this error, you should look in check the top right of Mission Planner and make sure ensure the COM port is set to Auto. If it is set to anything else you will not be able to load the Custom Flight Firmware, resulting in this error message.

...

Offline maps are a good tool to utilize if you are going to be flying at a later time in an area without Wi-Fi access, but still will need to access to the maps to flywhile flying. Without Wi-Fi, you will not be able to download the maps of the area you are flying in unless previously downloaded through offline maps while connected to a Wi-Fi network to save them.

• Here is a guide on how to download and use

...

• them on your smart controller : Downloading Maps While Offline and Setting Terrain Follow