Change How the SkyBoss Buttons are Mapped
WISPR SkyBoss-
The WISPR SkyBoss hand controller offers greater flexibility in mapping the buttons.
To change how the buttons are mapped, start by going to the control tab in settings in WISPR Ground Control.
Next, locate the controller layout section by scrolling down in the control tab.
L1-L4 can be changed to Loiter, Alt-Hold, Land, or Auto/Continue Mission. Set these buttons as you see fit.
When the Vio is selected, you can also change the functions of the left and right roll wheels. The options for these are Zoom, Gimbal Tilt, and Gimbal Yaw.
Additionally, you can change the direction the camera tilts or yaws by using the reverse checkbox next to each setting.
Example: If the reverse checkbox is unchecked, then turning the roll wheel clockwise will tilt the camera up and yaw it right. Reversing them will have the opposite effect.