Table of Contents

WISPR Ranger Pro Series Specifications

WISPR Ranger Pro 1100

Maximum Payload

6 lb.

Max Flight Time

22 minutes with 5-lb
26.5 minutes with 3.3-lb
33 minutes with 0.5-lb
38 minutes with 0-lb

Max Payload Stability Wind Rating

+50mph - Tested

Collision Avoidance

Omni-directional collision avoidance

RTK Compatible?

Yes

PPK Compatible?

Yes

Diagonal Wheelbase

38" unfolded
19" folded

Max Speed

60MPH

Max Takeoff weight

23 lb.

Height

15” without landing gear

28” with landing gear

Width

27.5”

Weight with battery

17 lb.

Max Operating Temperature

122⁰ F

Minimum Operating Temperature

-4⁰ F

Frame material

Carbon Fiber

Battery Requirement

1 x 6S, 25000mAh, 22.8V LiHV

Battery Weight

5.7 lb.

Propeller Size

18.5” x 6.3 folding carbon fiber propellers pair, balanced

24V power port?

Yes

HDMI I/O port?

Yes

Serial I/O port?

Yes

SBUS I/O port?

Yes

PWM

Yes, x3

Altitude accuracy

+/- 1”

Orientation LED light colors

Red, Blue

Hand controller?

Black or Blue Herelink Smart Controller

Flight controller firmware?

WISPR Flight Firmware (Open Source Software)

Ground Control Software?

WISPR Ground Control (Open Source Software)

Frame Type

Quad Copter

Warranty

1 – year manufacturer defect

Made in America?

Yes

Included in Purchase

*Smart Controller
*Case
*Battery
*Dual Battery Fast Charger
*2 - pairs of propellers
*Ranger Pro Carrying Case

Shipping Included

Yes

Made In America

Yes

WISPR Ranger Pro 1000 Overview

1. Unmanned Aerial System (UAS) Sensors and Antennas:

2. UAS I/O PUAS I/O Ports and Payload attachment:

3. Front Overview:

  1. RTK GNSS Receiver

  2. Folding Arm Fold Joint

  3. Landing Gear Detach Joint

  4. 24V XT60-M Power Output Port

  5. Communications Antenna

  6. Dual HDMI Input Ports

  7. Front Collision Avoidance LiDAR Sensor

4. Starboard Side Overview:

  1. SBUS I/O Port

  2. AUXILIARY Port

SBUS & AUXILIERY Ports pinout

5. Port Side Overview:

  1. Compartment cover for Smart Controller Pairing Button

  2. Drone Cooling System

  3. Dove tail mount for payloads

Smart Controller Pairing Button

6. Rear Overview:

  1. Flight controller configuration port

  2. Battery Tray

  3. Battery Input Plugin

  4. 5 Volt Out

WISPR Ranger Pro 1100 Overview

1. Unmanned Aerial System (UAS) Sensors and Antennas:

2. UAS I/O Ports and Payload attachment:

3. Front Overview:

  1. RTK GNSS Receiver

  2. Folding Arm Fold Joint

  3. Landing Gear Detach Joint

  4. 24V XT60-M Power Output Port

  5. Communications Antenna

  6. Dual HDMI Input Ports

  7. Omni-directional Collision Avoidance LiDAR Sensor

4. Starboard Overview:

  1. SBUS I/O Port

  2. AUXILIERY I/O Port

SBUS & AUXILIERY Ports pinout

5. Port Overview:

  1. Compartment cover for Smart Controller Pairing Button

  2. Drone Cooling System

  3. Dove tail mount for payloads

Smart Controller Pairing button

6. Rear Overview:

  1. Flight controller configuration port

  2. Battery Tray

  3. Battery Input Plugin

  4. 5 Volt Out

Accessories and Carrying Case Overview

1. Case External Overview

  1. Left Handle

  2. Right Handle

  3. Rolling Wheels

  4. Rolling Extension Handle

  5. 7 – Secure Snaps

2. Inside Carrying Case

3. Accessories Overview in Carrying Case

  1. Drone

  2. Landing Gear 1

  3. Landing Gear 2

  4. Battery Charger and Cables

  5. 2 – Battery

  6. Smart Controller

  7. Small Gimbal Platform

  8. Large Gimbal Platform

  9. Dual Gimbal Platform

4. Charging Batteries

Assembling the WISPR Ranger Pro Series Unmanned Aircraft System (UAS)

1. Attach landing gear to UAS body

2. Unfolding arms on drone

3. Inserting Battery into UAS

Smart Controller

Overview of Smart Controller

Top Overview Smart Controller

Bottom Overview Smart Controller

Front Overview Smart Controller

Front Buttons

Joystick Controls

To Manual Arm and Takeoff follow the diagram below. Once the drone is launched in the air, it will hold position until you send commands via the smart controller for it to move position.

To Manual Land and Disarm follow the diagram below. If you want to land using auto-land button, bring the UAS down to 5 feet above the ground and click the C button to auto-land.

To Increase Altitude, Decrease Altitude, and Rotate follow the diagram below.

To Strafe Left, Right, Forward, and Backwards follow the diagram below.

Top Buttons

To Capture Pictures, Record Videos, and Tilt the gimbal up & down, follow the diagram below.

Flight Checklist

Pre-Flight

Pre-Launch after powering on the UAS

Launch/In-flight

Landing

Maintenance

1. Replacing propellers on motors

  1. The drone uses 2 pairs of counterclockwise (ccw) and clockwise (cw) propeller propellers. The cw propeller has a L marked on the propeller and the ccw propeller has a R marked on it so you can easily tell the difference in the cw and ccw propellers. Ranger Pro Propellers are 18.5” with a pitch of 6.3.

  2. Attach the cw propellers to the front left and back right motors with the logo on the propeller facing upward towards the sky. Screw in propellers using the 2.5mm driver given with each drone sold. Make sure propellers are mounted tight to the motor and have no play.

  3. Attach the ccw propellers to the front right and back left motors with the KDE logo on the propeller facing upward towards the sky. Screw in propellers using the 2.5mm driver given with each drone sold. Make sure propellers are mounted tight to the motor and have no play.

2. WISPR Basic Tune-up after 200hrs

AFTER 200 HOURS OF ACTUAL FLIGHT CONTACT WISPR SYSTEMS AT SALES@WISPRSYSTEMS.COM FOR BASIC TUNEUP TO REPLACE MOTORS AND RETUNE THE AIRCRAFT.

Frequently Asked Questions (FAQ)