...
How to update Updating Wispr Drone Flight Firmware
Sections
| Table of Contents | ||||
|---|---|---|---|---|
|
Connect drone to computer
1. Download the latest Wispr Ground Control from our Downloads page.
2. Plug in a USB to USB Mini cord going from your computer/laptop (USB) to the back single port
...
(USB Mini) on the top tier
...
of the drone.
...
23. Once plugged into both, open mission planner. If you do not have mission planner please , download the latest version from here : https://ardupilot.org/planner/docs/mission-planner-installation.html
| Note |
|---|
Do not connect the drone to Mission Planner |
...
only open the program |
Go to setup ->install firmware -> Load custom firmware.
...
34. The latest custom firmware Wispr Flight Firmware will be included in the last zip file you received from WISPR. It most current Wispr Ground Control zipped folder obtainable on the downloads page. Flight Firmware will be saved as .apj file such as this (this is only an example). Once clicked on Load custom firmware the .apj will be loadedlike in the example below. Click the “Load custom firmware” button and select the .apj inside of the extracted folder. Wispr Flight Firmware will begin loading. A green progress bar will fill the status bar. Once it finishes to the end you have now upload uploaded the newest WISPR Flight Firmware onto your drone.
...
.
...
| Info |
|---|
While uploading the custom firmware, you may get a pop-up saying “Please unplug |
...
the board, press OK, and then plug your connection back into the |
...
Mission Planner”. This is normal and nothing to be alarmed about. Just follow those directions. This will not hurt |
...
the upload. (See below picture for example) |
...
...
Quick Tutorial Video : Updating WISPR Flight Firmware
...