...
Plug in a USB to USB Mini cord going from your computer/laptop (USB) to the back single port at (USB Mini) on the top tier which is a usb mini plugof the drone.
...
2. Once plugged into both, open mission planner. If you do not have mission planner please , download the latest version from here : https://ardupilot.org/planner/docs/mission-planner-installation.html
Do not connect the drone to Mission Planner .only open the program
Go to setup ->install firmware -> Load custom firmware.
...
3. The latest custom firmware will be included in the last zip file you received from WISPR. It will be saved as .apj file such as this (see picture below) (this is only an example). Once clicked Click on Load custom firmware and select the .apj file from your computer. The .apj will be loadedbegin loading. A green progress bar will fill the status bar. Once it finishes to the end you have now upload uploaded the newest WISPR Flight Firmware onto your drone.
...
| Info |
|---|
While uploading the custom firmware, you may get a pop-up saying “Please unplug the board, press OK, and then plug your connection back into the Mission Planner”. This is normal and nothing to be alarmed about. Just follow those directions. This will not hurt anything you are uploading. (See below picture for example) |
