...
Copy MavCam onto a micro SD card.
Insert microSD card into smart controller slot found on the bottom of the controller. The SD slot is to the left of the charging port on the controller.
Once inserted, go into gallary inside of your applications and look for the SD card file.
Once in the SD card file and find the MavCam .apk file and click . Click to install.
The app will request permission to overlay on other applications, and you will need to enable the corresponding toggle to allow this functionality..
MavCam is now installed and should show now be present as an app in your applications on your controller.
Open MavCam from your applications.
You should now see the MavCam controls at the bottom of your screen.
Slide with your finger the camera/video icon to the right to bring the MavCam Configuration screen up. Check the box “Auto start MavCam” and then exit out by pressing the X in the top right.
Open WISPR Ground Control (with your ILX connected and the drone booted)
Allow the parameters to download
Swipe the Camera/Video icons straigh up to show the MavCam Controls panel.
Press the OK button in the middle of the four arrows. This will display the camera’s settings.
Use the arrow keys to navigate to the briefcase icon
...
Changing settings on your ILX-LR1 camera via MavCam
...