...
Scroll down until you see Auto-land and uncheck “Enable auto-land”. Reboot your drone and from this point the drone will not have auto-land enabled.
...
You do not have to disable the laser range finder its, but flight controller will use baro and GPS as priority and laser range finder is secondary in landing state. The laser range finder is only used at altitudes lower than 50m so if data is bad due to highly reflective surface it is best practice to disable downward facing range finder as well so altitude is as accurate as possible. To do this simply uncheck “Enable downward-facing rangefinder” and it will be turned off. Reboot drone after making this change.
...