Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  • Select Vio as your payload in WGC before booting (so you do not have to reboot after)

  • Connect your Vio to the quick attack via the gimbal

  • Power on the drone and open QGroundControl and allow parameters to load fully

  • Once loaded close QGroundControl and open WisprGroundControl, allow parameters to load and you should have a working stream and you will have full function of the roll wheel.

  • IF YOU UPDATE TO A NEW WISPR VERSION, YOU WILL NEED TO CONNECT TO QGROUNDCONTROL AND ALLOW THE PARAMETERS TO LOAD. CLOSE OUT AND NO RE-ENTER INTO WISPR GROUND CONTROL.