...
| Info |
|---|
For some videos and information not listed on this page, check out our quick start guide: |
Sony A7R
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
When picking the Sony A7R in the payload setting dropdown of Wispr Ground Control or in the survey, configurations will change to the default settings WISPR has set for that payload. Changing this may result in mission configurations that do not match ideal values for the mission you wish to conduct. These values may be a changed as needed when planning a new mission. |
...
Bring your drone home, reboot and plan the mission again. This should reset all on the drone and you should not have a problem gathering the .TXT file.
This is caused by the GPS dropping out due to interfernce resulting in corruption of the log. Be mindful how close you are running your structure scan to the structure itself and surrouning structures/power lines.
WIRIS Enterprise
What should I do if my WIRIS camera does not have camera control?
...
| Widget Connector | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
Sony 24 Mapper
What should be done before flying with this payload?
...
Never go above 70/70 overlap when you plan a mission with this payload.
Zio and Vio
I only have partial control with the Zio or Vio. Zoom does not work, nor does stream swap between normal and thermal vision for the Vio.
This can be fixed by:
Completely uninstalling WISPRGroundControl then reinstalling
Booting the drone, connecting to WISPRGroundControl , and setting the payload to Vio
Reboot both the drone and WISPRGroundControl, allow the param bar to fully load the Vio firmware.
Reboot both again, and after the parameters are finished loading you should have full control.