Versions Compared

Old Version 5

changes.mady.by.user Karl Eaves

Saved on

compared with

New Version 6

changes.mady.by.user Karl Eaves

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Table of Contents

Windows Update

...

  1. Power on your Smart Controller and using a USB to Micro USB cord, connect your Smart Controller to your computer or tablet using a USB to Micro USB cord.

  2. Once connected, download the update file below

View file
nameWisprGroundControl_v0.1.28

...

  1. Download the latest version of Wispr Ground Control from this location.

  2. Extract the folder from the zipped file. YOU MUST extract the file.

...

  1. Open the Windows folder.

...

  1. Double click windows_update file to run the update script.

...

  1. Accept the terms and conditions by hitting the “y” key on your keyboard.

  2. If updated correctly, you

...

  1. will see the following screen and the updated version of Wispr Ground Control will now be available on your hand controller.

...

Linux Update

  1. Power on your Smart Controller and using a USB to Micro USB cord, connect your Smart Controller to your computer or tablet using a USB to Micro USB cord.

  2. Download the update file below at the link: latest version of Wispr Ground Control from this location.

  3. Extract the folder from the zipped file. YOU MUST extract the file.

  4. Open a terminal at path/to/update/folder/vX.Y.ZZ/Linux.

  5. Run the command ./linux_update.sh.

Info

WisprGroundControl Wispr Ground Control should be on the home page of your Smart Controller. If for some reason it is not you can simply go to settings and hold your finger on the app. Select Add to Favorites to add the app to the home screen.

Note

Issue: Script returns “adb is not recognized as an internal or external command”

Solution: This error is usually because the files have not been extracted. Extract the files from the zip folder, then open the new location.

Note

Issue: Script stuck on “Waiting for connection to hand controller… Please check your hand controller to ensure that you have enabled USB debugging from this device

Solution: The first time running the script from a new computer, there will be a prompt to accept the incoming connection on your hand controller. Select “Accept”. If the script still does not work or you do not see this prompt, try a different microUSB cable.