...
| Info |
|---|
Additonal tips can be added here |
WisprGroundControl should be on the home page of your Smart Controller. If for some reason it is not you can simply go to settings and hold your finger on the app. Select Add to Favorites to add the app to the home screen.
...
| Note |
|---|
Warnings and common errors can be added here |
If you get a screen that
...
reads “adb is not recognized as an internal or external command” instead of
...
“Successfully updated application!” message, you did not extract the file and it will not let you update until the file is extracted.
| Warning |
|---|
Things that should be absolutely avoided should be added here |
How to Update WisprGroundControl on your Smart Controller (Windows Version)
Windows Update:
1.Power on Smart Controller and using a USB to Micro USB cord, connect your controller to your computer or tablet.
2.Once connected, download this file
| View file | ||
|---|---|---|
|
3. When the file is finished downloading, extract the file. You will have two options, Linux or Windows. Choose the appropriate OS you are downloading on. In this case select Windows.
...
4. After selecting windows, select windows_update to update WisprGroundControl on your Smart Controller.
...
5.If updated correctly, you should get a screen that looks like this:
...
...
Be sure you are updating from the extracted file every time and not the zipped folder.
Check the icon of the folder path does not have a zipper on it as shows below
...
If the file does show it is zipped you can simply extract it by right clicking and selecting the extract all option.
...
If you get this message inside the Command Prompt, check your USB controller is connected correctly from the computer to the Smart Controller.
...
If you have confirmed the USB cord is connected correctly and you still get the message above, check to make sure you have USB debugging turned on on your Smart Controller or you will not be able to run the update.
To ensure this, go to settings and select developer options.
Inside of developer options, locate USB debugging and turn it on by using the slider. It will be lit up green once it is activated.
After enabling USB debugging, you can now run the update and update WisprGroundControl.
| Warning |
|---|
Things that should be absolutely avoided should be added here |