Page Comparison

...

• Hold the up and down arrows on the charger until the setting is changed changes to LiHV instead of LiPo.

• Plug the battery’s XT90 connector into the XT90 port on the charger (yellow plug).

• Plug the balance port on the battery into the balance port connected to the battery charger (white plug).

• Change charging to 20A, if the charger is not already set to this value.

• Press and hold the start button until the charger beeps three times. You should see a warning on the screen about charging high voltage batteries.

• Press Soft press start one more time to begin charging.

You should see the voltage increasing, as the battery is now charging. If you would like to change a setting, such as balanced charge to fast charge, simply press the start button once . The to stop charging. Then soft press start again and the selected option will blink , and can letting you know it is ready to be changed. Change the setting using the up or down arrows. Each press of the start button will select the next item on the screen that can be changedadjusted. Once you have the each settings configured the way you would like, press start again to lock the changes adjustments in.

...