...
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
*IMPORTANT - You will need to power on your Smart Controller, go into WISPR Ground Control, select the settings (Q WISPR Icon in the top left that takes you to general settings) and confirm Companion Computer is selected as the payload. This sets the correct baud rate parameters to allow the Companion Computer to connect to the flight controller. If you do not do this you will not get connection to the flight controller nor get and telementry data. |
...
If there is no connection to the flight controller you will not collect any data. To confirm you have flight controller connection, check the top right of the screen for a flashing green FC showing up and down arrows that also flash. You will also notice you are getting readings on your Speed, Altitude, Direction and distance of the UAV as well.
...