...
Ensure the gimbal is receiving power.
Verify the SBUS cable is completely fully plugged in and no wires feel loose.
Make sure the SBUS cable and be sure the cable is properly plugged in correctly. The wires from left to right should be Black/Red/White, as seen below:
...
My gimbal pitch doesn’t adjust while running a mission. What could be the problemHow can I resolve this?
Solutions:
Try to take a picture with the Take Picture Capture button on your Smart Controller (soft touch buttons).
Watch the camera controller (Air Commander Entire) while taking a picture with the soft buttons. You should see a white flash every time you take a picture.
Check that the Entire status light is blue. This means it is in the ready state.
Ensure your gimbal pitch is correct under the mission tab when planning your mission. The gimbal pitch selected is the angle the gimble will be set to while running the mission.
...
What should I do if the lever on my dove tail mount feels loose?
This can be fixed by tightening the nut on the lever. If this cannot be accomplished contact WISPR to have this replaced. Having a loose dove tail mount could lead to erratic flight, poor streaming from the payload, or even loss of the payload.
...