| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
The Tattu high voltage batteries used in the Ranger Pro should be charged on LiHV, rather than LiPo, which is the default setting on the SKYRC dual battery charger that is packaged with the droneWISPR drones. In the event of a power outage in a location where your charger was plugged in, be sure to change your your charger back to LiHV- as the charger will reset to LiPo when disconnected from power. |
How do I change set my battery charger settings to LiHV to charge for charging high voltage batteries, and what is the process of charging the a battery?
Hold the up and down arrows on the charger until the setting is changed to LiHV.
Plug the battery’s XT90 connector into the XT90 port on the charger.
Plug the balance port on the battery into the balance port connected to the battery charger.
Change charging to 20A, if the charger is not already set to this value.
Press and hold the start button until the charger beeps. You should get see a warning on the screen about charging HV high voltage batteries.
Press start one more time to begin charging.
You should see the volts increasing, as the battery is now charging. If you would like to change a setting such as balanced charge to fast charge, simply press the start button once to scroll through items that . The selected option will blink, and can be changed . To change them use using the up and or down arrows. Each press of the start button will select the next item on the screen that can be changed. Once you have the setting settings configured the way you would like, press start again to lock the changes in.
...
Can I still fly using a damaged battery?
NEVER fly with a damaged battery, even if it is minimal damage. This can cause your drone to fly in an unsafe fashion, and crash. Replace the battery and safely dispose of the damaged battery.
When inserting the battery into the battery tray on the drone, should I have the positive and negative wires facing to the right, or facing to the left?
...